While the bathroom is usually not considered the soul of a house, it is still an important room that is visited by all members of the household at least twice a day. Anyone wanting to renovate their bathroom should go ahead and take all the advice given here into account as they plan their project so they maximize the value that it will add to the home. There are a few different things you need to be sure of when you go to renovate the bathroom and minimize the amount of possible future water damage.
Water is both the friend and enemy of your bathroom, since water can cause a considerable amount of damage if the area is not prepared to deal with it properly. If you are remodeling a bathroom, make sure that there is an exhaust fan in the ceiling to vent steam out of the room during showers and baths. Humidity buildup in a tight space made of porous materials like drywall is a bad idea, since these will become discolored and molded fairly quickly if it is not kept in check. Mold loves to live in the wettest areas of your home, so it is in your best interests to make sure that the bathroom stays as dry as possible.
You also need to be sure that everything in the bathroom gets sealed properly by the contractor that you hire to do it. If you remodel it yourself, you should do your research and make sure that you know what you are doing. Tile that is not sealed correctly will allow water underneath it and this will cause damage to the floors over time.
Depending on the age of the house and the condition of the plumbing behind the walls, you may want to replace the plumbing with newer material. Check it for possible leaks and do not hesitate to replace the plumbing if you are having doubts.
Try to make sure that your toilet does not overflow very often. Even though the tile underneath it should be sealed completely to keep water from getting to the floor underneath, you should not take chances. If you choose to have carpet in the bathroom instead (bad idea), you will need to be even more careful.
The plumbing underneath the sink also needs to be checked out. Depending on the condition of the vanity and what it is made of, you may want to replace it to add some more value to the room.
Jim Corkern is a writer and promoter of quality
water damage restoration and
mold remediation companies across the united states.
Friday, September 28, 2007
Some Wet Basement Tips
You probably do not consider the basement to be the soul of your house, but even if not, this is still a room that you need to take care of. Since the rest of the home rests on this part of the structure, you need to make sure that the basement is structurally sound and if it is a wet basement, this may be a real problem.
Water leaking into the basement tends to cause problems with the walls and floors, possibly cracking them and creating a humidity problem. Humidity issues in the basement usually lead to mold growth and this is a problem that no homeowner wants to have to deal with. It can lead to the very structural problems that you are trying to avoid on top of causing health issues for the people living in the house, especially the people who are in the basement the most often.
Controlling the humidity in the basement is not usually a big issue if there are no existing leaks allowing water inside. Installing a dehumidifier could really help with the problem of high humidity and so can putting in an exhaust vent down there. Having an exhaust vent in the basement can be a big help, especially if you use the basement for a laundry room or have another bathroom or shower down there. Without a place to go, steam is absorbed by the rafters or the drywall and usually causes it to become discolored or molded.
Cracks in the concrete walls of your basement where water is leaking in need to be fixed with a concrete injection. You can do this now with a regular caulking gun, but do not try to fix it with caulking that you would use in the bathroom. Neither caulking nor cement will work, since these will eventually become loose and simply fall out.
Keep the rain gutters around your house cleaned out and put some more soil around the base of the house, especially if water is forming puddles around it. This will help stop water from leaking down into the basement.
Having carpet in your basement is probably not that bad of an idea if you are using it for an entertainment or family room, but any wet carpet needs to be taken up along with the padding underneath it. Mold starts to grow after about 48 hours after the item has been wet, so if the basement has been wet for a while and so has the carpet, trying to clean it is probably an inefficient idea. Even if you cleaned the carpet, you would have to take up the padding and replace it, because it cannot be cleaned. The best thing to do is just purchase new carpeting.
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and
flood and water damage cleanup companies across the united states.
Water leaking into the basement tends to cause problems with the walls and floors, possibly cracking them and creating a humidity problem. Humidity issues in the basement usually lead to mold growth and this is a problem that no homeowner wants to have to deal with. It can lead to the very structural problems that you are trying to avoid on top of causing health issues for the people living in the house, especially the people who are in the basement the most often.
Controlling the humidity in the basement is not usually a big issue if there are no existing leaks allowing water inside. Installing a dehumidifier could really help with the problem of high humidity and so can putting in an exhaust vent down there. Having an exhaust vent in the basement can be a big help, especially if you use the basement for a laundry room or have another bathroom or shower down there. Without a place to go, steam is absorbed by the rafters or the drywall and usually causes it to become discolored or molded.
Cracks in the concrete walls of your basement where water is leaking in need to be fixed with a concrete injection. You can do this now with a regular caulking gun, but do not try to fix it with caulking that you would use in the bathroom. Neither caulking nor cement will work, since these will eventually become loose and simply fall out.
Keep the rain gutters around your house cleaned out and put some more soil around the base of the house, especially if water is forming puddles around it. This will help stop water from leaking down into the basement.
Having carpet in your basement is probably not that bad of an idea if you are using it for an entertainment or family room, but any wet carpet needs to be taken up along with the padding underneath it. Mold starts to grow after about 48 hours after the item has been wet, so if the basement has been wet for a while and so has the carpet, trying to clean it is probably an inefficient idea. Even if you cleaned the carpet, you would have to take up the padding and replace it, because it cannot be cleaned. The best thing to do is just purchase new carpeting.
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and
flood and water damage cleanup companies across the united states.
Smoke and Water Damage After a Fire
Most homeowners think that when they are dealing with a house fire, the only type of damage to the property that they will have to contend with is fire damage. This is not always true, since something that is almost always used to put out a house fire is water. Any excess amount of water in your home can cause water damage to the structure, any appliances, and furniture inside and since a fire truck can hold countless gallons, you will likely see this after the fire has been put out and you re-enter your home.
Talk to your fire marshal and make sure that your home is safe to return to after the fire is over. If you see standing water in any portion of the house, cut the electricity off before you go into it, since you could be electrocuted by venturing inside before it is cut off. Do what you can to remove as much of the water from the house as possible before mold starts to grow on anything. If you have food in the freezer that is still sealed, take these and put them into another freezer at a friend’s home.
Whatever you do, do not allow any children or pets back into the house until the rehabilitation inside the house is finished. Pay attention to the health of your pets, as well, after the fire is over and make sure that they get any care that they may require. Birds will need special attention, since they do not respond well to environmental changes.
Do not use an upright vacuum cleaner to clean the soot and ash from your carpet. The brushes on the bottom of these will only drive this debris further into the fabric. You should also not use one on upholstered furniture for the same reason. After you vacuum floors and furniture, you should not walk on them and if you have to, tarp should be laid down over them.
Smoke damage on the ceilings and upper walls will need to be painted over. Trying to wash this off the walls usually does not work and only smears the stain around. Painting over this is the only efficient option.
Food that was opened inside the house when the fire started needs to be thrown out. Do not eat anything that had the seal on it broken, whether in the refrigerator or on the counter, such as chips.
Jim Corkern is a writer and promoter of quality
damage restoration companies and
mold removal companies across the united states.
Talk to your fire marshal and make sure that your home is safe to return to after the fire is over. If you see standing water in any portion of the house, cut the electricity off before you go into it, since you could be electrocuted by venturing inside before it is cut off. Do what you can to remove as much of the water from the house as possible before mold starts to grow on anything. If you have food in the freezer that is still sealed, take these and put them into another freezer at a friend’s home.
Whatever you do, do not allow any children or pets back into the house until the rehabilitation inside the house is finished. Pay attention to the health of your pets, as well, after the fire is over and make sure that they get any care that they may require. Birds will need special attention, since they do not respond well to environmental changes.
Do not use an upright vacuum cleaner to clean the soot and ash from your carpet. The brushes on the bottom of these will only drive this debris further into the fabric. You should also not use one on upholstered furniture for the same reason. After you vacuum floors and furniture, you should not walk on them and if you have to, tarp should be laid down over them.
Smoke damage on the ceilings and upper walls will need to be painted over. Trying to wash this off the walls usually does not work and only smears the stain around. Painting over this is the only efficient option.
Food that was opened inside the house when the fire started needs to be thrown out. Do not eat anything that had the seal on it broken, whether in the refrigerator or on the counter, such as chips.
Jim Corkern is a writer and promoter of quality
damage restoration companies and
mold removal companies across the united states.
Remodeling Your Bathroom
Remodeling your bathroom after some water damage can be quite a hassle, but knowing that the new renovations will stand the test of time and add a good amount of value to your home can make the whole project worth it.
One thing that you will need to do, especially in bathrooms where carpet was installed, is make sure that the floor boards and support beams are not water damaged to the point that they are rotten. Replacing floor boards can be expensive, but if you are remodeling, you do not want to have a good looking job on top of an unstable foundation. Knowing that the floor is not going to collapse underneath you brings a lot of peace of mind to you and the rest of your family. Spare no expense on the floor to make sure that it is structurally sound.
Installing tile is not the hardest thing to do in the bathroom, but you really need to make sure that it is done correctly. If it is done badly, water will get right back underneath the tiles and will begin damaging the floor underneath immediately. Having a properly sealed floor in the bathroom is essential if you want to make sure that the floor boards do not become water damaged again any time soon.
The most important areas of the bathroom floor that need to be sealed are around the bath tub and the toilet. These items are more likely to overflow from time to time than the bathroom sink and the areas around them need to be very water tight.
Make sure that the plumbing that you have installed is made completely water tight. You really do not want to have leaks inside the walls where they are obviously difficult to get to. You will have to take out drywall or even possibly tile to get to leaks in the wall sometimes, so make sure whoever you hire to do it does the job correctly.
Every bathroom needs to have an exhaust fan in the ceiling or on the upper portion of a wall so the steam produced by showers and baths does not collect on the ceiling. Not only can this collecting discolor the ceiling over time, but it can also allow mold to start growing in a relatively short period of time.
If you are going to have a shower stall that is enclosed around the ceiling, it will need to have its own exhaust vent and light, since steam will not be allowed to escape the shower stall very easily.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
One thing that you will need to do, especially in bathrooms where carpet was installed, is make sure that the floor boards and support beams are not water damaged to the point that they are rotten. Replacing floor boards can be expensive, but if you are remodeling, you do not want to have a good looking job on top of an unstable foundation. Knowing that the floor is not going to collapse underneath you brings a lot of peace of mind to you and the rest of your family. Spare no expense on the floor to make sure that it is structurally sound.
Installing tile is not the hardest thing to do in the bathroom, but you really need to make sure that it is done correctly. If it is done badly, water will get right back underneath the tiles and will begin damaging the floor underneath immediately. Having a properly sealed floor in the bathroom is essential if you want to make sure that the floor boards do not become water damaged again any time soon.
The most important areas of the bathroom floor that need to be sealed are around the bath tub and the toilet. These items are more likely to overflow from time to time than the bathroom sink and the areas around them need to be very water tight.
Make sure that the plumbing that you have installed is made completely water tight. You really do not want to have leaks inside the walls where they are obviously difficult to get to. You will have to take out drywall or even possibly tile to get to leaks in the wall sometimes, so make sure whoever you hire to do it does the job correctly.
Every bathroom needs to have an exhaust fan in the ceiling or on the upper portion of a wall so the steam produced by showers and baths does not collect on the ceiling. Not only can this collecting discolor the ceiling over time, but it can also allow mold to start growing in a relatively short period of time.
If you are going to have a shower stall that is enclosed around the ceiling, it will need to have its own exhaust vent and light, since steam will not be allowed to escape the shower stall very easily.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Friday, September 14, 2007
Mold and your Citrus Crops
Anyone who works with citrus crops knows that they can take a very long time to grow and cultivate. But, perhaps even more frustrating than waiting on the crops to have to grow and ripen are the various molds and fungi that could afflict the crops. The two most prominent molds that affect a citrus crop post-harvest are blue mold, and green mold. These two are caused by the single mold Penicillium digitatum. All citrus fruit growing regions have this mold and it is most certainly a serious threat to the crops.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
Hurricanes and Water Safety
If there is a hurricane heading to your area, then it is most important that you make preparations, incase you decide to simply wait the hurricane out. Arguably the most important thing that you can do is to make sure that you have a sizeable bottled water supply in your home. It is important that you make sure that the water supply is proportionate to the number of people dwelling at your house, as there must be enough water for the duration of the storm. It is critical that you have clean drinking water during the storm. The water from the sea and sewer system may have affected the water in your tap, so you should never assume that the water coming out of your faucet is clean. You should not drink anything but bottled water during a hurricane. This contaminated water could sicken your family or guests and even cause death in the worst case. You should make sure that there is at least one gallon of water for one person to drink a day. Water purification tablets and chlorinated bleach come highly recommended, as they can be used to clean water in most situations. It is important that you let the treated water set for at least 30 minutes before you drink it.
It is important that you, under no circumstances whatsoever, do not drink water that may be contaminated. Damage to your body caused by contaminated water is devastating and if you have drank any contaminated water and are afflicted with the symptoms of it, it is very unlikely that you will be able to make it to a hospital during the hurricane and death could very well result. If you receive any cuts or wounds, do not try and wash it off with faucet water. This could make the contamination’s job that much easier. You should instead wash the cut or cuts with soap and chlorine bleach treated water. This will help keep serious harm from happening.
You should at no point allow children to play in flood waters, no matter how hot it may get in your building. If there are toys that have come into contact with water that you so much as suspect as being contaminated, you should have the toys disinfected before allowing the children to play with them again. You should also board up your windows and doors with plywood, as it keeps glass from being blown into your home and causing cuts.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
It is important that you, under no circumstances whatsoever, do not drink water that may be contaminated. Damage to your body caused by contaminated water is devastating and if you have drank any contaminated water and are afflicted with the symptoms of it, it is very unlikely that you will be able to make it to a hospital during the hurricane and death could very well result. If you receive any cuts or wounds, do not try and wash it off with faucet water. This could make the contamination’s job that much easier. You should instead wash the cut or cuts with soap and chlorine bleach treated water. This will help keep serious harm from happening.
You should at no point allow children to play in flood waters, no matter how hot it may get in your building. If there are toys that have come into contact with water that you so much as suspect as being contaminated, you should have the toys disinfected before allowing the children to play with them again. You should also board up your windows and doors with plywood, as it keeps glass from being blown into your home and causing cuts.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
How to Waterproof Your Deck
One thing that always makes a homeowner proud is a newly finished deck. And for a few months it may look very good. However, if you have not had your deck waterproofed, your deck could end up being a very ugly addition to your home. If you want your deck to be around for a long time, then waterproofing it is absolutely essential. Without waterproofing, than cracking and warping can occur, and that means your deck will not be very far from destruction. Fortunately, waterproofing doesn’t have to be very difficult.
The very first thing to do to waterproof your deck is to give it a very thorough cleaning. Now, usually the best time for one to start waterproofing the deck is to start right after you build the deck. However, cleaning it off is the first thing to do if you do not have the option of starting right away. You should start the cleaning process is to sweep off any and all debris that may be on the deck. Then remove any furniture that may be on the deck. Once all of the debris and furniture is removed, you can go to your local hardware store and purchase a cleaning solution. You can employ the use of a pump sprayer to apply the cleaning agent to the deck. It will eventually start to foam, and at that point you should start to scrub the deck with a scrub brush that has stiff bristles. The bristles will give a little extra muscle to remove any stubborn stains that may be left on there, especially ones from soot or grease. After scrubbing, rinse the deck off as thoroughly as possible with a garden hose. It’s a good idea to wear eye protection of some kind in order to keep any grit from the deck out of your eyes.
Now, after the deck has had time to dry, there are two options available. If the wood is more or less new, you have the option to put a new stain on it. If you do not want a new stain, then now is the time to apply water sealant onto the deck in order to protect the wood. Applying the sealant is best done with a sprayer or roller. The deck should dry completely after a few days, and then it should be alright to walk on it without worrying about damaging any of the sealant.
Jim Corkern is a writer and promoter of quality
Water Damage Restoration Contractors and
Miami water Damage companies.
The very first thing to do to waterproof your deck is to give it a very thorough cleaning. Now, usually the best time for one to start waterproofing the deck is to start right after you build the deck. However, cleaning it off is the first thing to do if you do not have the option of starting right away. You should start the cleaning process is to sweep off any and all debris that may be on the deck. Then remove any furniture that may be on the deck. Once all of the debris and furniture is removed, you can go to your local hardware store and purchase a cleaning solution. You can employ the use of a pump sprayer to apply the cleaning agent to the deck. It will eventually start to foam, and at that point you should start to scrub the deck with a scrub brush that has stiff bristles. The bristles will give a little extra muscle to remove any stubborn stains that may be left on there, especially ones from soot or grease. After scrubbing, rinse the deck off as thoroughly as possible with a garden hose. It’s a good idea to wear eye protection of some kind in order to keep any grit from the deck out of your eyes.
Now, after the deck has had time to dry, there are two options available. If the wood is more or less new, you have the option to put a new stain on it. If you do not want a new stain, then now is the time to apply water sealant onto the deck in order to protect the wood. Applying the sealant is best done with a sprayer or roller. The deck should dry completely after a few days, and then it should be alright to walk on it without worrying about damaging any of the sealant.
Jim Corkern is a writer and promoter of quality
Water Damage Restoration Contractors and
Miami water Damage companies.
Fire Damage Restoration Advice
One of the most devastating things can happen to a home owner is to have a house fire. And once the embers are finally smoldered out, the first thing one usually wants to do is to go into the charred remains to see just what are you home can be salvaged and cleaned. However, you should hold off on doing this until you have sought council from your insurance claims adjuster. This way, you can make sure that you do not waste your time, and money, and cause more damage as opposed to repairs. Your insurance adjuster can give guidance on how best to restore and/or replace your destroyed or damaged belongings.
One helpful thing that an insurance claims adjuster can do is refer you to a fire restoration company. Companies such as these can give very helpful tips to prevent further damage from being done to your home and property. Fire restoration companies can even tell you how to restore damaged properties. They will also give you an estimate of the likely price of thoroughly cleaning and deodorizing your home. Even though these services are, more often than not, expensive, it will most likely be a lot less than having to replace your damaged floors and furniture.
Now, if you find that you are incapable of affording the services a fire restoration company can offer, there are certain measures that you can take on your own. However, be sure that your fire marshal approves your plan and deems it safe enough for you to do before you go back into your home.
It is important that the very first thing you do to repair your home is to get as much air circulating through it as possible. The easiest way of doing this is to simply open some doors and open some windows and bring in a fan. If there has been any water damage, perhaps as a result of the fire trucks, you will probably want to invest in a de-humidifier. Any wet items should be dried as soon as possible. You might also want to consider buying a heavy duty vacuum cleaner. If you cannot afford cleaning services, do not use an upright vacuum or attachments because this would only set soot damage further in the carpet. After the vacuuming is done, you should cover the carpet with a tarp, so you do not cause further soiling while cleaning.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
One helpful thing that an insurance claims adjuster can do is refer you to a fire restoration company. Companies such as these can give very helpful tips to prevent further damage from being done to your home and property. Fire restoration companies can even tell you how to restore damaged properties. They will also give you an estimate of the likely price of thoroughly cleaning and deodorizing your home. Even though these services are, more often than not, expensive, it will most likely be a lot less than having to replace your damaged floors and furniture.
Now, if you find that you are incapable of affording the services a fire restoration company can offer, there are certain measures that you can take on your own. However, be sure that your fire marshal approves your plan and deems it safe enough for you to do before you go back into your home.
It is important that the very first thing you do to repair your home is to get as much air circulating through it as possible. The easiest way of doing this is to simply open some doors and open some windows and bring in a fan. If there has been any water damage, perhaps as a result of the fire trucks, you will probably want to invest in a de-humidifier. Any wet items should be dried as soon as possible. You might also want to consider buying a heavy duty vacuum cleaner. If you cannot afford cleaning services, do not use an upright vacuum or attachments because this would only set soot damage further in the carpet. After the vacuuming is done, you should cover the carpet with a tarp, so you do not cause further soiling while cleaning.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Detecting Mold with Light
There is almost nothing that plagues one’s house quite as badly as the pest called mold. Mold is usually very easy to find, because more often than not it is brightly colored and absolutely hideous. However, not all molds are as easy to detect. Some mold is actually very well hidden from the naked eye. There are a few types of molds, such as members of Penicillium sp. and Aspergillus sp. groups, which are capable of being next to invisible. However, it is not impossible to find these molds. In fact, you can use one of the simplest objects in your house to your advantage. A flashlight.
While it may sound simplistic enough to use a flashlight to find mold, there is a trick to it. Using the flashlight will not help you to detect the mold unless you shine it in the right way. You cannot simply shine the light directly on the surface where you suspect mold, because you will most likely see absolutely nothing. Instead, you must shine the light along the surface. Doing this will make the difference between getting rid of the mold or just using up battery power for nothing.
Mold is very tricky because it likes to hide in little areas that are difficult to get to without tools. One of these places is inside wooden paneling. Using the light along the paneling can show whether or not the paneling is buckled and in need of removal or replacement. There may be drywall or perhaps even a cavity behind the drywall because some people like to replace water damage drywall with paneling.
Moisture does not exactly mean that there is mold in the area, but this does not mean that you should neglect to look in areas where there is moisture. This is because it will help you realize that mold has the potential to grow in almost every single area in your home. It will also teach you that the mold can especially grow in the places you cannot see it. It is very much like the phrase “knowing is half of the battle.” In this case, knowing can make the difference between a house devoid of mold and a house infested with mold. If you do not know how to find mold, then you cannot combat it.
Do not just look for the black mold that you may constantly hear about. You should know that some black molds are merely cosmetic and if you don’t have the mold tested to confirm whether or not it is dangerous, you could end up wasting thousands of dollars.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
While it may sound simplistic enough to use a flashlight to find mold, there is a trick to it. Using the flashlight will not help you to detect the mold unless you shine it in the right way. You cannot simply shine the light directly on the surface where you suspect mold, because you will most likely see absolutely nothing. Instead, you must shine the light along the surface. Doing this will make the difference between getting rid of the mold or just using up battery power for nothing.
Mold is very tricky because it likes to hide in little areas that are difficult to get to without tools. One of these places is inside wooden paneling. Using the light along the paneling can show whether or not the paneling is buckled and in need of removal or replacement. There may be drywall or perhaps even a cavity behind the drywall because some people like to replace water damage drywall with paneling.
Moisture does not exactly mean that there is mold in the area, but this does not mean that you should neglect to look in areas where there is moisture. This is because it will help you realize that mold has the potential to grow in almost every single area in your home. It will also teach you that the mold can especially grow in the places you cannot see it. It is very much like the phrase “knowing is half of the battle.” In this case, knowing can make the difference between a house devoid of mold and a house infested with mold. If you do not know how to find mold, then you cannot combat it.
Do not just look for the black mold that you may constantly hear about. You should know that some black molds are merely cosmetic and if you don’t have the mold tested to confirm whether or not it is dangerous, you could end up wasting thousands of dollars.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Subscribe to:
Posts (Atom)
